Pall HC7500SUT8H Replacement Filter Element - Cross-Reference & Specifications
Pall HC7500SUT8H Replacement Filter Element - Cross-Reference & Specifications
Hydrafil Part Number: BF-PAL-362726-L8-25MB | Ships same day from Detroit, MI | OEM-equivalent performance
When a hydraulic system demands high flow capacity at a general-purpose 25-micron rating, the Pall HC7500SUT8H's long-body (10.9 in) construction is the answer - roughly 58% more filter area than the short L4 variant, which translates directly into lower differential pressure at elevated flow rates and longer service intervals before changeout. This configuration with Buna-N seals is the workhorse for large industrial power units, press hydraulics, and high-flow return lines operating on standard mineral-based fluids where flow volume, not fluid chemistry, drives the element selection.
Dimensional Specifications
The BF-PAL-362726-L8-25MB matches the HC7500SUT8H in all critical dimensions, ensuring a drop-in fit in your existing housing without modification.
| Specification | Value |
|---|---|
| Outer Diameter (Top) | 5.06 in |
| Outer Diameter (Bottom) | 5.06 in |
| Element Length | 10.9 in |
| Thread Size | 1.5-16 UNF |
| Collapse Rating | 100 psid |
Media & Construction
The L8 long-body format houses significantly more microglass media area than the L4 counterpart, supporting higher-flow applications without sacrificing filtration performance:
- Filtration Media: Microglass Fiber - delivers high dirt-holding capacity across the extended media area, enabling longer service life between elements changes in high-flow circuits
- Seal Material: Buna-N (Nitrile) - compatible with petroleum-based hydraulic fluids, mineral oils, and most water-glycol HFC fluids; the standard seal choice for the majority of industrial hydraulic systems
- End Caps: Corrosion Resistant Steel - maintains seal integrity under the pressure differential cycling typical of high-flow return line service
- Center Tube: Corrosion Resistant Steel - provides structural rigidity against collapse in high-velocity flow conditions
Filtration Performance Rating
The BF-PAL-362726-L8-25MB achieves Bx[c=25?m] = 1000 (99.9% single-pass efficiency at 25 microns) with a multi-pass Beta value of Bx[25?m] = 200 per ISO 16889 - the same ratings as the OEM Pall HC7500SUT8H. The extended media area of the L8 body allows these ratings to be maintained at higher flow rates before differential pressure triggers a bypass event.
The L8 long-body configuration is the right choice for high-flow systems - running an L4 element in an oversized housing or high-flow circuit will result in shorter service intervals and elevated differential pressure, increasing energy consumption and reducing element life.
ISO Standards Compliance
Hydrafil elements are manufactured and tested to the same ISO standards Pall applies to OEM elements. The BF-PAL-362726-L8-25MB is tested in compliance with:
| ISO Standard | What It Tests |
|---|---|
| ISO 2941 | Collapse & burst resistance |
| ISO 2942 | Fabrication integrity & bypass valve function |
| ISO 2943 | Material compatibility with hydraulic fluids |
| ISO 3724 | Flow fatigue characteristics |
| ISO 3968 | Pressure drop vs.?flow rate characteristics |
| ISO 16889 | Multi-pass performance (Beta ratio methodology) |
About the Pall HC7500SUT8H
The HC7500SUT8H is the high-flow, standard-fluid variant of Pall's HC7500 series, specified for large industrial hydraulic systems where mineral oil is the working fluid and flow rates demand the added media area of the long-body format. Typical installations include large injection molding machines, hydraulic press lines, steel processing equipment, and central hydraulic power units with multiple actuator circuits. Maintenance teams running high-cycle systems often specify the L8 element specifically to extend change intervals and reduce hydraulic system downtime.
Why Order from Hydrafil?
- OEM-equivalent performance at a lower cost per element
- Manufactured and sourced in the USA - Detroit, Michigan facility
- Same-day shipping on in-stock elements
- 200,000+ filter cross-references available
- Technical support: +1 (313) 915-4120
Shop the BF-PAL-362726-L8-25MB ? https://www.hydrafil.com/products/pall-hc7500sut8h
Questions? Call (313) 915-4120 or email sales@hydrafil.com
Pall and HC7500SUT8H are trademarks of their respective owners, referenced here solely for cross-reference and compatibility identification purposes.