FSL High Viscosity Filtration Systems

Order and customize your order quickly and easily.

FSL Specifications

Get detailed information about the FSL

Dimensions1 Height

50” (127 cm)

Width

22” (56 cm)

Depth

28” (71 cm)

Weight

222 lbs (101 kg)

Connections Inlet with 3-way valve

FSL05-FSL10: 1” FNPT

FSL20-FSL30: 1.5” FNPT

Outlet

FSL05-FSL10: 1” FNPT

FSL20-FSL30: 1.25” FNPT

Operating Temperature Fluid Temperature

30°F to 225°F

(0°C to 105°C)

Ambient Temperature

-4°F to 104°F

(-20C to 40C)

Materials of Construction Vessel

Carbon steel with industrial coating

Electric Motor TEFC, 56-215 frame
0.5-3 hp, 1450-1750 RPM, see Appendix for amp ratings.
Motor Starter MSP (motor starter/protector) in an IP65, aluminum enclosure with short circuit and overload protection.
Pump Cast iron, positive displacement gear pump with internal relief. Maximum pressure on pump inlet 15 psi (1 bar). Consult factory for higher pressures.
Pump Bypass Full bypass at 150 psi (10 bar)2
Pneumatic Option Air Consumption ~40 cfm @ 80 psi3
Media Description M

Microglass, high performance glass media for all hydraulic & lubrication fluids. βx[C] ≥ 4000

A

Microglass high performance media combined with water removal scrim. βx[C] ≥ 4000

W

Stainless steel wire mesh media βx[C] ≥ 2 (βx ≥ 2)

Viscosity 2-5000 cSt4
Fluid Compatibility Petroleum and mineral based fluids, #2 diesel fuels (standard). For specified synthetics contact factory for compatibility with fluorocarbon seal option. For phosphate ester (P9) or skydrol fluid (S9) compatibility select fluid compatibility from special options.
Hazardous Environment Options Select pneumatic powered unit (Power Option 00) or explosion proof NEC Article 501, Class 1, Division 1, Group C+D. Call for IEC, Atex or other requirements. If Explosion Proof option (X--) selected, no electrical cord or cord reel will be included.
  • Dimensions are approximations taken from base model and will vary according to options chosen.
  • Dimensions are approximations taken from base model and will vary according to options chosen.
  • Air consumption values are estimated maximums and will vary with regulator setting.
  • When sized and installed appropriately. Contact factory for applications above 800 cSt for sizing requirements.