FPL - DEDICATED OFF-LINE FILTER PANEL
Order and customize your order quickly and easily.
FPL Specifications
Get detailed information about the FPL
| Dimensions1 |
Height
22” (58 cm) |
Length
42” (107 cm) |
Depth
12” (31 cm) |
Weight
138 lbs (63 kg) |
||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Connections |
Inlet with 3-way valve
1” FNPT |
Outlet
1” FNPT |
||||||||||
| Operating Temperature |
Fluid Temperature
30°F to 225°F (0°C to 105°C) |
Ambient Temperature
-4°F to 104°F (-20C to 40C) |
||||||||||
| ΔP Indicator Trigger |
Standard MF110 Assemblies
18 psi (1.2 bar) |
Special Options D1 + S1 (S75/D)
22 psi (1.5 bar) |
Special Option D2 (DFN)
32 psid (2.2 bard) |
Special Option P1 (PFH)
73 psid (5 bard) |
||||||||
| Filter Assembly Bypass |
Standard MF110 Assemblies
25 psid (1.7 bard) |
Special Options D1 + S1 (S75/D)
25 psid (1.7 bard) |
Special Option D2 (DFN)
50 psid (3.4 bard) |
Special Option P1 (PFH)
102 psid (7 bard) |
||||||||
| Materials of Construction |
Frame
Carbon steel with industrial coating |
|||||||||||
| Electric Motor | TEFC, 56-145 frame 0.5-1 hp, 1450-1750 RPM |
|||||||||||
| Motor Starter | MSP (motor starter/protector) in an IP65, aluminum enclosure with short circuit and overload protection. | |||||||||||
| Pump | Cast iron, positive displacement gear pump with internal relief. Maximum pressure on pump inlet 15 psi (1 bar). Consult factory for higher pressures. | |||||||||||
| Pump Bypass | Full bypass at 150 psi (10 bar)2 | |||||||||||
| Pneumatic Option Air Consumption | ~40 cfm @ 80 psi3 | |||||||||||
| Media Description |
M
Microglass, high performance glass media for all hydraulic & lubrication fluids. βx[C] ≥ 4000 (βx ≥ 200) |
A
Microglass high performance media combined with water removal scrim. βx[C] ≥ 4000 (βx ≥ 200) |
W
Stainless steel wire mesh media βx[C] ≥ 2 (βx ≥ 2) |
|||||||||
| Viscosity | 2-5000 cSt4 | |||||||||||
| Fluid Compatibility | Petroleum and mineral based fluids, #2 diesel fuels (standard). For specified synthetics contact factory for compatibility with fluorocarbon seal option. For phosphate ester (P9) or | |||||||||||
| Hazardous Environment Options | Select pneumatic powered unit (Power Option 00) or explosion proof NEC Article 501, Class 1, Division 1, Group C+D. Call for IEC, Atex or other requirements. If Explosion Proof option (X--) selected, no electrical cord will be included. | |||||||||||
